Sprinkler
Water Curtain drencher
1. vertical installation,open to face protected target
2.novel structure,compact,elegant looking.
ZSTM water curtain Drencher.
ZSTM drencher is a key component in the automatic or manual water curtain system. They are applicable to buildings demanding water curtain protection to form a partition between medium or large spaces, thus protecting the windows, cornices, inflammable wall surfaces and fire resisting roller blinds of the building.
Features
Vertical installation with the opening facing the protected objects is recommended. If the water curtain partition is formed, install the drencher horizontally.
Novel structure, compact, fine look, accurate spraying shape and maximal water curtain guaranteed.
The durable body is made from copper alloy, the two types of natural color and chrome plating color are available for your choice.
ZSTM water curtain Drencher
Flow Volume Coefficient (K) : 35/44/61/77
Spray angle (°C) : 98/110/113/114
Connecting thread :R1/2
Spray Capacity Q (L/min): Q=K (10P) K: Flow volume coefficient P: Working pressure
Impact Fire Sprinkler
Nominal working pressure: 0.35 Mpa
Flow Volume coefficient (K): 21/26.5/34/42/53/57/85/107
Flow volume (L/min): 40/50/63/80/100/125/160/200
Discharge angle (°): 90 or 120 or 150
Connecting thread: R1/2
ZSJZ Water Flow Indicator
ZSJZ type water flow indicator is a component part of automatic sprinkler fire extinguishing system, driving vanes through water flow in the sprinkler pipe network. It actuates the micro-switch to transfer water flow signal into electric signal, while connecting to the controller so as to start automatic fire alarm system. The indicator can be used for checking the operation of automatic sprinkler system and helping determine the area on fire, applicable to wet, dry and pre-acting system.
There are grooved type, clamp type, flanged type and saddle type.
Feature
Compact structure, elegant appearance, sensitivity can be adjusted.
It adopts stainless steel area connecting, convenient to operate and reliable construction.
Complete specifications: DN 50- DN200.
Connecting types include saddle, clamp, flanged, threaded, welding, etc. Plz refer to attached figures. Among them, saddle type is especially suitable for reconstruction or expansion project, clamped type connecting piping projects, etc. It provides such convenient and quick installation that only two fastening bolts have to be screwed down.
During installation, make sure that the direction of media flow in the pipeline is in conformity with the direction of arrow shown on the water flow indicator. During installation, make sure that the vane does not touch the pipe inner wall and , the rotation of vanes and driving link is flexible. After punching a (1)42mm insert hole on the piping, make sure burr keep the electric junction box of water flow indicator upright and pointing upwards. The two clamp nuts should be tightened symmetrically.
Technical Parameter
Applicable Bore (mm) | Rated Working Pressure | Factory Sealing Test | Operation flow | Switch Capacity | Contactor Output |
50-200 | 1.2Mpa | 2.4Mpa water pressure, 5min no leakage | 15L per min – 37.5L per min, adjustable. | AC220V, 0.5A DC 24V, 0.3A | General Opening C-CN, General Closing C-NO |
Note: There are general opening and general closing contactor connecting ways for usage choice. |
ZSJY type Pressure Switch
Note: Dual normally open contact pressure switches are available.
Rated Working Pressure | Sealing Test Pressure | Operation Pressure | Contactor Capacity |
1.2 Mpa | 2.4Mpa | 0.05Mpa | DC24V,0.3A, 220V,0.5A |